![]() ![]() Keep in mind that some very badly sulfated battery plates could take several days to clean. If there has been at least a 20% increase in Cold Cranking Amps (CCA), you may proceed repeating the process as needed, using the analyzer to check for improvement. Next, use the PulseTech PT390 digital battery analyzer as mentioned above to check the battery for improvement. The number of times it may cycle will be dependent upon a number of factors including the age of the battery and the time it may have been sitting unused, the depth of discharge, the physical size of the battery (amount of plate surface area) and the depth or state of sulfation damage that may have occurred. As it continues to pulse and de-sulfate the battery it is likely to cycle through the charge and pulse sequence a number of times before the battery is brought back up to an improved condition. During the "off" period it is no longer charging but you will notice that it will continue to pulse condition the battery. At any given point during the charge it may shut off automatically so it won't overcharge your battery. Leave the Charger on the battery for at least 36 hours. If the light does not flash, you can proceed. If the Bad Battery light begins to flash, it is indicating a problem and the battery is probably not recoverable. Make sure the cells are filled with distilled water and attach the battery to the Pulse Charger. Here's what you do: Use a PulseTech 390PT (741X390) Digital Battery Analyzer to determine if the battery is a good candidate for recovery (Note: Even though the analyzer may read "REPLACE BATTERY," it could still be recoverable.) The ideal way to recover a battery is to use our Xtreme Charge 20A Pulse Recovery / Maintenance Charger. Although our products are designed for keeping good, new batteries in peak condition for a longer period of time, some of them can be used to bring batteries that will not accept and hold a charge back to useful condition. Yes, if you are using our Pulse Technology products. Take a look in our store for more information about our battery chargers. ![]() It's ideal for all service facilities that deal with multiple vehicles with multiple batteries. It is a portable charger that can solve your battery problems much more quickly – times 12! It not only charges 12 batteries at a time but will maintain and condition them as well. The SC-12 is a multiple (12 station) 6A battery charger. Use either of these Pulse Chargers to return unreliable 12-Volt lead-acid batteries to active service. At the same time, the Xtreme Charge uses our unique and patented Pulse Technology to remove sulfation buildup. They also works off either 110- or 220-volt ac power so it can be used virtually anywhere in the world. It's a state-of-the-art charging system (up to 2.5 amps) that works with all 12-volt lead-acid battery types including conventional flooded lead-acid batteries and sealed "maintenance-free" batteries, including VRLA, AGM and gel cell batteries. The Xtreme Charge single and dual station units are state-of-the-art "smart" charging systems that are actually four chargers in one. We offer several types of chargers including the XC100 Xtreme Charge, the X2 dual station Xtreme Charge and the SC-12 Pulse Charger – 12-station charger. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |